Description

Features:
High sensitive LED light switch with blue indicator light.
Universal, fit for any 7″ 10″ 12″ 20″ 30″ 40″ light bars that is within 180w.
40A power relay & 30A blade fuse for multiple safety protection. With 2 lights output connections, which can hook with 2 led work light or 2 small watt led light bar and any else off road LEDs.
With wiring harness, easy to install.
A perfect accessory for off road vehicles, working vehicles, and any automobile that could use a relay to power specific equipment.

Specifications:
Main material: ABS;
Color: Black;
Light Color: Blue;
Pin: 5;
Connection terminal quantity: 5;
Main cable length: about 2m;
Operating Voltage: 20A/12V — 10A/24V DC;
Relay: 12V 40A;
Fuse: 30A;
Package size: 23 * 9.5 * 7cm / 9.1 * 3.7 * 2.8in;
Package weight: 368g / 13oz;

Package List:
1 * LED Rocker Switch;
1 * Wiring Harness;

Installation tips:
1. Connect the red+ wire from the fuse to battery +; connect the black wire from the relay to the battery -;
2. Connect the white+;black- wire from the relay to light bar(red/black correspond to the wire of lights bar) ;
3. Connect the red+/black- wire of the switch to battery or any place of your car system to get power for the switch;
4. Turn on on/off button of switch to test the lights bar.
Tips:1)If let the harness short circuit the wire would melt,pls let professinal installer to wire it;2)If you wire the harness to a battery directly,the rocker switch will glowing even when the vehicle is off;if you don’t want the switch always glowing after you turned off engine,you can hook the harness to a source on your fuse panel.